Instructions

Before washing, cool the vehicles surface and remove all lose dirt sediment using a high-pressure washer. Bucket and Sponge Method: Add approximately 50 ml of Ceramic Shampoo to 5 litres of water and agitate to a high foam. The use of an AutoSmart grit guard is recommended to minimise sediment collecting on the sponge or brush. Using a sponge or soft bristled brush, evenly rub over the vehicles surface paying extra attention to stubborn marks, traffic film build-up and bugs. Rinse with water, and for best results dry with an AutoSmart chamois or drying towel. Venturi Dilutions: Apply Ceramic Shampoo through foam lance of the pressure washer, applying from bottom up. Allow to dwell then agitate using a sponge, or soft fibre brush, evenly rub over the vehicles surface paying extra attention to stubborn marks, traffic film build-up and bugs. Rinse with water, and for best results dry with an AutoSmart chamois or drying towel. Dilution Ratio: Dilution rate will vary according to degree of soiling and local water quality. Use Accuset dilution restrictors for optimum control. Pressure Washer: Optimal dilution 1:35 Manual Use: Optimal dilution 1:35 CAUTION: Do not allow product to dry on surface. May affect some single pack paint finishes. If in doubt tests before use. Dilution Ratio: Dilution rate will vary according to degree of soiling and local water quality. THIS PRODUCT SHOULD BE USED IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS.

FEATURES